Metrology
Metrology
MarGear GMX 600 W Universal Gear Measuring Center
ZH
The new GMX 600 W cylinder coordinate measuring center
The successful combination of diameter, gear and form measurement in one setup saves on additional investment and maintenance costs as well as time!

Full functionality as gear or cylinder coordinate measuring center and form tester up to an outside diameter of 600 mm.

The MarGear GMX 600 W, as a complete solution, can also be used for measuring hydraulic parts, crankshafts, camshafts and pistons.

Combining gear measuring tasks with various diameter, form & position features has never been easier. Thanks to high precision scales and smooth drive units even contour measurements and waviness analysis are possible.

With over 6000 units sold, the MarWin environment is a clear and simple way of creating complete programs in Teach In mode.
This improves programming efficiency and reduces the possibility of incorrect use.

Proven GMX realtime machine error correction is also used for positioning movements with the new MarEcon control unit, guaranteeing maximum speed and precision throughout the entire measuring and movement sequence.

The high-precision 3D scanning sensor combined with fully automated swivelling unit leads to highest flexibility even regarding future measuring tasks.

The use of standardized interfaces leads to universal communication in terms of Industry 4.0. The following interfaces are available:


  • GDE interface for inner and outer gears
  • Data export to QS-STAT
  • ASCII

  • 技术数据
  • 应用
  • 附件

最大工件重量 [kg]
300 (on fixed base plate) 100 (on centering and tilting table)
质量 [kg]
2250
精确度
Accuracy class I for gear measurement according to VDI/VDE 2612/2613 Group 1 at 20°C ±2°C
轴向跳动偏差(µm+µm/mm 测量半径)
0.07 µm + 0.0008 µm/mm
脚注文本
*max. diameter of spur gears
径向跳动偏差(µm,相对于工作台高度)
≤ 0.1 µm
测量路径 (mm),Z 轴
700
测量路径 (mm),Y 轴
600
最大直径* [mm]
600
峰间距 [mm]
1000
测量路径 (mm),X 轴
300

Fully automatic testing of:
  • Diameter and distance
  • Straight and helical toothed cylindrical gears
  • Synchronizing gear
  • Form and location (also with centering and tilting table)
  • 3D geometries like line form
  • Optional: camshafts, crankshafts and pistons


  • Probe arm changer (4 boxes)
  • Anti vibration damping system
  • XXL centering and tilting table (centering path up to ± 72 mm ! )
  • Tailstock 1000mm