Metrology
Metrology
MarSurf PS 10 移动式粗糙度测量仪器
ZH
"sMAHRtSurf" - Simple, smart and mobile
  • Compact roughness measuring instrument for mobile use
  • Simple and intuitive to use: As easy to use as a smart phone
  • Large, illuminated 4.3" TFT touch display
  • Adjustable display
  • Data backup as TXT, X3P or PDF file
  • Creation of completed PDF measuring records in the measuring device
  • Customer-specific comments for the PDF measuring record are entered directly into the MarSurf PS 10
  • Power supply independent operation: Over 1200 measurements without having to recharge the instrument
  • An all in one solution. Small and lightweight (approx. 500 g)
  • Instrument flexibility: Removable drive unit
  • 31 surface parameters offer the same range of functions as a laboratory instrument.
  • Error free operation thanks to an integrated, removable roughness standard
  • Quick access to your frequently used functions via the Favorites list in the display
  • Automatic cutoff selection, so even non-specialists can be sure of getting the correct measuring results

  • NEW: Additional version with transverse drive unit MarSurf PS 10 C2 available (article number 6910235)

  • 技术数据
  • 应用
  • 货运

 
6910230 - MARSURF PS10 SET W/2UM PROBE
6910232 - MARSURF PS10 SET W/ 5UM PROBE
6910235 - MARSURF PS10 C2, TRANSVERSE DRIVE, 2UM PROBE
测量原则
探针法
探针法
Stylus method
输入
感应式滑动测头
感应式滑动测头
inductive skidded probe
测量单元
公制/英寸
公制/英寸
metric/inches
测量范围 mm
350 µm、180 µm、90 µm(自动切换)
350 µm、180 µm、90 µm(自动切换)
0.350
轮廓分辨率
32 nm、16 nm、8 nm(自动切换)
32 nm、16 nm、8 nm(自动切换)
8 nm
过滤器符合 ISO/JIS 标准
相位校正轮廓过滤器,符合 DIN EN ISO 11562 标准;专用过滤器,符合 DIN EN ISO 13565-1 标准;ls 过滤器,符合 DIN EN ISO 3274 标准(可脱离)
相位校正轮廓过滤器,符合 DIN EN ISO 11562 标准;专用过滤器,符合 DIN EN ISO 13565-1 标准;ls 过滤器,符合 DIN EN ISO 3274 标准(可脱离)
Gaussian filter as per ISO 16610-21 (formerly ISO 11562), special filter as per DIN EN ISO 13565-1, Lambda s filter as per DIN EN ISO 3274 (can be switched off)
短行程符合 ISO/JIS
可选
可选
selectable
扫描长度符合 ISO 12085 (MOTIF)
1 mm, 2 mm, 4 mm, 8 mm, 12 mm, 16 mm
1 mm, 2 mm, 4 mm, 8 mm, 12 mm, 16 mm
1 mm, 2 mm, 4 mm
根据 ISO/JIS 评估长度
1.25 mm、4.0 mm、12.5 mm
1.25 mm、4.0 mm、12.5 mm
1.25 mm, 4.0 mm
采样长度数量符合 ISO/JIS
可选:1 至 5
可选:1 至 5
selectable: 1 to 16
探针
2 µm
5 µm
2 µm
测量力 (N)
约..0.7 mN
大约 0.7 mN
0.00075
校准功能
动态
动态
dynamic; Ra, Rz, Rsm
储量
最多 15 个轮廓,最多 20000 个结果
最多 15 个轮廓,最多 20000 个结果
min. 3900 profiles, min. 500,000 results, min. 1500 PDF records, expandable with microSD card up to 32 GB
其他
锁定/密码保护,日期/时间
锁定/密码保护,日期/时间
Lock/password protected, date/time
防护系统
IP 40
IP 40
IP 40
可充电电池
锂离子电池
锂离子电池
Lithium-ion battery, min. 1200 measurements
宽范围电源
100 至 264 V
100 至 264 V
100 to 264 V
尺寸 (mm)
160 mm x 77 mm x 50 mm
160 mm x 77 mm x 50 mm
160 mm x 77 mm x 50 mm

  • For shafts and housing components
  • For large machines
  • For large workpieces
  • For milled and turned parts
  • For ground and honed workpieces
  • On the production line or directly on the machine; ideal for rapid testing of the surface roughness of a workpiece

  • MarSurf PS 10 unit
  • Drive unit (detachable)
  • 1 standard probe conforming to standards
  • Built-in rechargeable battery
  • Roughness standard integrated into housing (detachable), including Mahr calibration certificate
  • Probe protection
  • Power source with 3 adapters
  • Operating instructions
  • Carry case with shoulder strap
  • USB cable
  • Extension cable for drive unit (length 1.2 m)
  • Height adjustment (integrated)