适用于计量室、生产、来料检验和开发质量控制的高效优质计量技术。
齿轮泵和混配系统，以最高精度处理液体和糊状物。
用于无间隙线性和旋转运动的高精度旋转冲程轴承，可用于机器和设备制造。
创新的计量学，应用范围广泛:
- • 长度和直径
- • 表面和轮廓
- • 形状和位置
- • 齿轮和轴
液体和糊剂的精确混合与计量：
- • 齿轮计量泵
- • 纤维生产用泵
- • 计量混合分配机以及混合头
用于以下行业无间隙线性和旋转运动的转冲程轴承：
- • 机械工程
- • 精密工程
- • 光学
- • 电子
- • 以及许多其他行业
作为一家活跃于国际范围的公司，Mahr 不仅在德国拥有专利，在世界范围内也拥有专利。
Manage measurement programs with Excel
The initial situation was that the customer had around 4,000 different but similar rotationally symmetrical standard parts with a MarShaft Scope 750 plus. In theory, this would have required 12,000 MarWin EasyShaft programs. However, the software specialists at Mahr found another solution with the help of Excel.
Parameterized programs
And this is how it works: The customer already had a database with the measured values of the 4,000 components. This database was read out via Excel as a table of workpiece characteristics. At the same time, the Mahr programmers created a template measuring program. This could then be multiplied over three processing steps in Excel for the previously read characteristics: MarWin EasyShaft was able to create a measuring program for each individual component automatically and without any extra programming effort. Optical diameters; distances to flat surfaces, radii and diameter transitions; radii, roundness and coaxialities were checked.
"With this solution, our customer only had to create around 20 parameterized programs," says Stefan Lüders, application engineer at Mahr. "This saves him a lot of time while maintaining the high quality of the measurement results."
Are you also interested in parameterized programs for your measuring tasks? Then please contact us at info@mahr.com
